GREEN BUILDING MATERIAL

GREEN BUILDING MATERIAL

AERCON BLOCKS

Aerocon Blocks Sizes Are 600MMX200MMX100MM, 600MMX200MMX150MM, 600MMX200MMX200MM, 600MMX200MMX225MM. Aerocon Blocks Applications Are Internal Wall Partitions, External Wall Partitions, Compound Wall, Parapet Walls. Aerocon Blocks are Light Weight Blocks And Compression Strength is More Than Other Cement Blocks.

 

 

AEROCON WALL PANEL

Aerocon Panels are cement sandwich panels, made of two fibre reinforced cement facing sheets, on either sides of a light-weight concrete core.

  • Cost: Light-weight, therefore results in structural savings up to 20%.
  • Time: 10-20 times faster to construct.
  • Labour: Pre-cured and ready-to-use, therefore eliminates on-site curing

POROTHREM bLOCK

Compressive strength of porotherm brick is greater than 3.5MPa. The application of high temperature during its manufacturing process and the present of teeracotta material in its composition gives the material excellent strength

METAL DUCT CLADDING

Manufacturers Specification for Supersil 84R Panel Exterior Cladding System.

Panel Details (Aluminium):

Supersil make 84 R, Round edge panels, 84mm wide x 15mm deep x length up to 5mtr. formed out of 0.71 mm thick (TCT) Aluminium alloy (AA) 8011-H3, fixed on Louvre Carriers. Panels shall be powder coated on both the surfaces with special exterior SUPERCOTE powder to enhance property of Fadeness Resistivity.

METAL fALSE CEILING

TECHNICAL SPECIFICATION (SUPERSIL 84 R / 84 RF / 184 R / 284 R)

Manufacturers Specification for 84 RF /184 RF Concealed Perforated / Plain Panel False Ceiling System with Flush Profile.

PANEL DETAILS (ALUMINIUM)

Supersil make Round edge panels, 84 /184 mm wide x 15 mm deep x length up to 5 meter. Formed out of 0.50 mm thick (TCT) Aluminium alloy 3S (AA) 3003 fixed on carriers. Panel shall be powder coated on external surface only.

PANEL DETAILS (GALVANIZED STEEL):

Supersil make Round edge panels, 84 / 184 mm wide x 15 mm deep x length up to 5 meter. Formed out of 0.50 mm thick (TCT) Galvanized steel fixed on carriers. Panel shall be powder coated on external surface only.

EXTERIOR SUN LOUVERS

Technical Specification (SUPERSIL 84R SL-4)

Manufacturers Specification for 84R SL-4 Exterior Plain Louvre System

Panel Details (Aluminium):

Supersil make 84 R, Round edge panels, 84mm wide x 15mm deep x length up to 5mtr. Formed out of 0.71 mm thick (TCT) Aluminium alloy 8011-H3, fixed on Louvre Carriers. Panels shall be powder coated on both the surfaces with special exterior SUPERCOTE powder to enhance property of Fadedness Resistivity.